[. . . ] Spin Speed rpm Special Options Easy Prewash Intensive Rinse Spin Speed Ironing Rinse Hold Reduction Start Delay Programme Care Labels Type of wash / Notes kg Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. For heavily soiled laundry the additional “Prewash” option can be selected as well. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton. Slightly to normally soiled textiles made of cotton and/or synthetics. [. . . ] can similarly deviate from the values in the table, because it takes into account the * The remaining time indicator household conditions applicable at that time. **To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out. Appliance in “Rinse Hold” : • Press the “Rinse Hold” button again: the programme will terminate automatically with the selected spin cycle. • If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme and press the “Start/Pause” button again. “Spin Speed Reduction” button • Every programme has an automatically allocated maximum spin speed. • If the spin speed “0” is selected, the final spin is cancelled, but not the intermediate spins. START DELAY The “Start Delay” button allows the user to run the machine at his convenience, for example at night when electricity is cheaper. • Press the “Start Delay” button several times to select the delay time by 1 to 19 hours; • Press the “Start/Pause” button . The indicator light of the “Start/Pause” button lights up and the lamp of the “Start Delay” button flashes. • The time delay indication disappears when the programme starts and is replaced by the remaining time . • The number of hours preselected can be reduced later by pressing the “Start Delay” button again. To cancel the “Start Delay” option • Turn the programme selector to the “ ” position. • Reselect the desired programme and options and press the “Start/Pause” button . PROGRAMME START Turn on the tap and press the “Start/Pause” button . The indicator light of the “Start/ Pause” button lights up. After starting the programme, the programme sequence indicator signals the Wash, Rinse and Spin phases. Note: If there is a power interruption or if the appliance is disconnected during the cycle, the programme will run again from the point where it was interrupted. LID LOCK For safety reasons, the lid is locked during certain phases of the cycle. At the end of the cycle or during an interruption, the lid unlocks automatically after about 1 minute. END OF WASH CYCLE The remaining time is on “0: 00” and the “End” lamp lights up. The luminous indicator of the “Start/Pause” button flashes. Note: the “Start Delay” and “Prewash” options cannot be selected after a programme change. [. . . ] “Intensive Rinse” button • The amount of water is increased to ensure a more intensive rinse. • This option is particularly suitable for areas with very soft water, washing baby linen and people with skin allergies. “Rinse Hold” button • The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from fading. • This option is particularly recommended for the “Synthetic” , “Delicate” and “Daily Mixed” programmes. [. . . ]